| 1. | Analytical method of frequency selective surface based on mode matching technology
基于模匹配技术的频率选择表面分析方法 |
| 2. | Based on the mode matching theory and the software simulation , the influences on field strength in different polarization modes were studied
本文在矩形巷道模式匹配理论的基础上，运用软件模拟的方法，具体分析了截面尺寸对不同极化模式下的场强变化的影响。 |
| 3. | The program that can numerically solver the question of mode coupling in horn has been programmed according to the coupling wave theory and mode matching technology
本文在对耦合波理论和级连模匹配技术的理论推导的基础上，编制了数值求解各个模式在喇叭中耦合过程的计算程序。 |
| 4. | The domestic research plan has been proposed and undertaken in nowadays . the progress in subsonic and supersonic combustions has been attained , but the ejecting mode and mode match of rbcc has just been begun
国内已制定了研究计划并正在开展，其中亚燃和超燃模态的研究取得了相当的进展，但引射模态以及模态匹配的研究还刚刚起步。 |
| 5. | The mechanisms of perclos are describe in this paper . a perclos - based recognition algorithms of motor driver fatigue is developed and achieved . by using the image recognition and gray scale mode matching technique
概述了数字图像处理的基本过程：图像捕获的图像为24位真彩色图像，在获取图像后，对图像预处理：主要有图像增强和图像滤波。 |
| 6. | The system primarily uses the protocol analysis technology and mode matching arithmetic in realizing network engine . through the combination of the above two , it effectively monishes the target matching scope and improves the detecting speed
系统在实现网络引擎时，主要使用了协议分析技术和模式匹配算法，通过两者的结合，有效地减小目标的匹配范围，提高了检测速度。 |
| 7. | A feasible method based on the mathematical model and symmetry analysis is presented to detect and locate the driver ' s eye in an image and the gray scale mode matching technique is used to determine the driver fatigue level
而驾驶员的眼睛状况能够综合反映这些客观因素。尤其是眼睛闭合持续时间的百分率p s值和眼睛闭合持续时间的人小能够较为准确的表明驾驶疲劳的程度。 |
| 8. | Compared with the traditional lamp - pumped solid - state lasers , the diode - pumped solid - state lasers ( dpssls ) have many advantages such as high efficiency , long lifetime , all - solid - state , small size and little heat effect , etc . of many kinds of dpssls , laser diode ( ld ) end - pumped nd : yag laser plays an important role and has been found wide applicatins in industry , mainly because of its good mechanical and optical properties of nd : yag crystal and good mode matching to output a fundamental transverse mode
与传统的灯泵浦相比，激光二极管泵浦固体激光器( dpssls )具有高效、长寿命、全固化、热效应和体积小等优点。在众多的dpssls中，激光二极管( ld )端面泵浦nd ： yag激光器在工业中起着重要的作用并得到了广泛的运用，这主要归因于nd ： yag晶体具有良好的机械和光学特性，而且端面泵浦具有良好的模式匹配，能获得基横模激光输出。 |
| 9. | The goal of this paper is to obtain a method that can compute the kc parameter of each higher mode rapidly and precisely , and then write corresponding programs . on the basis of foreign and domestic references , after carefully comparison , the transverse technique of the mode matching method is adopted in this paper
本课题的研究目标旨在得到一种能快速、精确地计算脊波导中主模及各高次模kc的有效方法，并编制相应的程序。在广泛查阅国内外相关资料的基础上，反复比较，本文采用了模式匹配法的横向谐振技术以得到有关kc的特征方程。 |
